Welcome to Temperature Sensors
& Monitors page.

PendoTECH Single Use Temperature SensorsTM measure temperature in your processes accurately and cost effectively. They are perfect for filtration and chromatography processes, filling operations,
and general process monitoring. These disposable sensors connect to monitors via a reusable cable. Suitable monitors include the handheld units TEMP14 and TEMP340, the PendoTECH ThermoMATTM monitor/alarm/transmitter, a PendoTECH Process Control System, or other pre-qualified third party monitors. They are the alternative low-cost solution for use with tubing and bioprocess containers to the existing temperature measurements devices
on the market.

Sensor Features

To optimally adapt to tubing and bag assemblies,
the sensors are available with either a hose barb
fitting or a luer fitting. Tubing can be secured directly to the hose barb fitting and the hose
barb design imparts no obstruction on the fluid
path that can cause a pressure drop and there is
no dead-leg at the point where the temperature
is measured. The luer fitting can be connected to
a variety of fittings that can securely adapt to tubing or other devices.

The temperature sensing element is a thermistor.
No calibration is required because the temperature versus resistance for the thermistor element is
well-defined within the specified accuracy range and is verified during manufacturing. Within the instrument, the measured resistance is converted to the temperature.

 


TECHNICAL DOWNLOADS

Specification Sheet
 
 
 
  Luer sensor shown connected
to different size fittings for
adaptation to dlfferent
processes. The center
picture shows the connection
to the monitor cable
Single Use Pressure Sensors
PressureMAT
TemperatureSensors
ConductivitySensor
FlowSensor
NFF
TFF
BioreactorPressureControlMonitoring
BioreactorProcessControl
PendoKit
ThrottlingPinchValve
MagmaASP
MagmaPistonPump
PinchValves

  • Available in a wide variety of sizes to adapt to different processes- from a luer fitting and up
  • Can be gamma irradiated with tubing and
    bag assemblies
  • High sensitivity to temperature change
  • Better than +/- 0.2°C accuracy (typ. better than 0.1) in the specified range of 0-70°C
  • Polycarbonate (luer) or polysulphone (hosebarb sensors) material of construction
  • NO calibration required, each is tested during manufacturing to be within specification
  • All fluid path materials meet USP Class VI requirements
  • Certificate of quality included
  • Manufactured in a FDA Registered, ISO 13485 certified facility; Class 100,000 clean room

Connection to Monitors

The hose barb sensors connect to the monitor via
a 10-foot (3.0m) long cable. One end has a molded connector to connect to the sensor connector and the other end has a 1/4 inch headphone plug commonly used by many commercially available monitors. The luer sensor has a custom molded connector on the 7-foot (2.1m) long re-usable monitor cable that is quickly secured to the temperature sensor. There is an alignment guide on the sensor that prevents it from being connected improperly. Disconnection of the cable connector from the sensors is quick and easy and the monitor indicates the sensor has been disconnected.

TEMP14 & TEMP340 Handheld Units: They have a rugged design with a large backlit display, a built-in stand, and optional AC adapter. They feature a sealed control panel, Min/Max /hold function,
° C/ ° F and low battery indicator. The TEMP340 can manually store or automatically log up to 2000 sets of readings that are time-stamped. The data can be downloaded to a PC via USB.

Monitor cable for hose barb sensor
      
   


ORDERING INFORMATION

TEMPS-N-050... Single use temperature sensor, non-sterile, polysulphopne & stainless steel,1/2 inch hose barb

TEMPC-N-999... Single use temperature sensor, with luer fitting with o-ring, stainless steel

Fittings for luer sensors:

PDKT-103-03 ... 1/4 inch x 1/4 inch (0.64 x 0.64 cm) polycarbonate straight connector with luer port

PDKT-104-03 ... 3/8 inch x 3/8 (0.95 x 0.95 cm) inch polycarbonate straight connector with luer port

PDKT-000-03 ... Male x female x female luer tee, polycarbonate

PDKT-000-04 ... Male x female x female luer tee, polypropylene

PDKT-650-TEMPB ... 10 foot reusable temperature sensor cable with 1/4 phone jack term. for barb sensors

PDKT-650-TEMPL ... 7 foot reusable temperature sensor cable with 1/4 phone jack term. for luer sensors
 

 

Please contact us at request@pendotech.com for more information.

Click here to fill out our online form to join our mail list for new product and service updates.

Copyright © 2010, by PendoTECH